Gently wipe the LED array surface with a soft tissue. Close the top cover and Change the image drum when the print becomes faint or begins to deteriorate. Press the cover release Close the top cover and press it down to latch it closed. Start the Status Monitor for the printer. Select the Printer Select the Printer Setup tab and click on the Printer Menu button. Select the Test Print tab and click on the Cleaning button. Open the Manual View all the pages. Add page 81 to Favourites. Enable zoom.
Higher print density means toner is used up faster. Remember, this is only an average: actual results may vary. The first toner cartridge installed in a new printer has to fill the image drum reservoir and saturate the developing roller with toner. The first standard toner cartridge normally produces about 1, pages after installation.
Add page 82 to Favourites. The toner used in this printer is a very fine dry powder contained in the toner cartridge. Have a sheet of paper handy so that you have somewhere to place the used cartridge while you install the new one. Dispose of the old cartridge responsibly, inside the pack that the new one came in. Follow any regulations, recommendations, etc.
If you do spill any toner powder, lightly brush it off. If this is not enough, use a cool, damp cloth to remove any residue.
Do not use hot water, and never use solvents of any kind. They will make stains permanent. If you inhale any toner or get it in your eyes, drink a little water or bathe your eyes liberally in cold water. Seek medical attention immediately.
Downloaded From ManualsPrinter. Add page 83 to Favourites. The image drum should last approximately 25, pages continuous printing. This number is approximate because different numbers of pages are printed each time and the environmental conditions and the paper type used may vary. Also, the Error LED indicator blinks fast when the image drum requires changing. If the printer has been po wered on, the fuser may be hot.
This area is clearly labelled. Do not touch. Add page 84 to Favourites. Remove the used image drum and toner cartridge. Follow the installation instructions on or inside the box containing the new image drum to install the new image drum.
Follow the installation instructions on or inside the box containing the new toner cartridge to install the new toner cartridge. The green image drum surface at the base of the cartridge is very delicate and light sensitive. Do not touch it and do not expose it to normal room light for more than 5 minutes.
If the drum unit needs to be out of the printer for longer than this, please wrap the cartridge inside a black plastic bag to keep it away from light. Never expose the drum to direct sunlight or very bright room lighting.
Always hold the image drum unit by the ends or from the top. If the printer has been powered on, the fuser may be hot. Add page 85 to Favourites. Press the Online button to return the printer to offline status. Press the Select button and the Drum Counter is reset. Return the printer on line by pressing the Online button. Add page 86 to Favourites.
The printer grips the paper and prints a cleaning page. If subsequent printing appears faded or uneven, try replacing the toner cartridge. Using the Online button 1. Press the Online button to take the printer off line. Open the Manual Feed Tray and insert a sheet of A4 plain paper between the paper guides.
Press and hold down the Online button for at least five seconds. Add page 87 to Favourites. Press the Select button. Press Cancel to exit the menu. The printer should now be on line. Wipe the LED array gently with an anti-static cleaning pad that is generally available for computer cleaning.
Add page 88 to Favourites. Remember login. Login or create new account. Add to Favourites. Download as PDF. Overview View all the pages Comments. Page Using the Online button 1. Press the Online button to take the printer off-line. Press and hold down the Online button for at least four seconds, but less than seven seconds.
The printer prints a list of the menu settings and a demo print page. Using the Status Monitor 1. Select the Printer Setup ON - ready to receive data. Liquid crystal display.
0コメント